Resmed aircurve 10 asv user guide

[Helmi]

Resmed aircurve 10 asv user guide
.
.
Download / Read Online Resmed aircurve 10 asv user guide
.
.
.

.
Top element. WARNING Read this entire guide before using the device. CAUTION In the US, Federal law restricts this device to sale by or on the order of a physician. Stop button Press and hold for three seconds to enter power save mode. Turn to navigate the menu and press to select an option. Dial Turn to adjust a selected option and press to save your change. Close the water tub and insert it into the side of the device. Connect the free end of the air tubing firmly onto the assembled mask. See the mask user guide for detailed information. Recommended masks are available on Stop or breathe normally if SmartStart is enabled. You will know that therapy is on when the Sleep Report screen is displayed. The pressure bar shows the inspiratory and expiratory pressures in green. The green bar will expand and contract as you breathe in and out. Power save mode Your AirCurve 10 device records your therapy data. In order to allow it to transmit the data to your care provider, you should not unplug the device. However, you can put it into power save mode to save electricity. In My Options, turn the dial to highlight Humidity Level and then press the dial. Turn the dial to adjust the humidity level and press the dial to save the change. If you continue to get a dry nose or mouth, or moisture in your mask, consider using ClimateLineAir heated air tubing. Caring for your device It is important that you regularly clean your AirCurve 10 device to make sure you receive optimal therapy. The following sections will help you with disassembling, cleaning, checking and reassembling your device. Hold the water tub at the top and bottom, press it gently and pull it away from the device. Checking You should regularly check the water tub, air tubing and the air filter for any damage. Replace it if it is leaking or has become cracked, cloudy or pitted. Replace it if the seal is cracked or torn. Air travel compliance letters can be downloaded and printed from Troubleshooting If you have any problems, have a look at the following troubleshooting topics. If you are not able to fix the problem, contact your care provider or ResMed. Wait for air pressure to build up or turn Ramp Time off. My screen is black Backlight on the screen may have turned off. Solution High leak detected, connect your tubing Air tubing may not be connected properly. Make sure the air tubing is firmly connected at both ends. Make sure your mask is fitted correctly. See your mask user guide for fitting instructions or use the Mask Fit function to check your mask fit and seal. If you notice any unexplained changes in the performance of the device, if it is making unusual sounds, if the device or the power supply are dropped or mishandled, or if the enclosure is broken, discontinue use and contact your care provider or your ResMed Service Center. Use only ResMed parts and accessories with the device. Use only vented masks recommended by ResMed or by the prescribing doctor with this device. It is recommended that mobile communication devices are kept at least 1 m away from the device. Information regarding the electromagnetic emissions and immunity of this ResMed device can be found on Products page under Service and Support. This warranty is only available to the initial consumer. If the product fails under conditions of normal use, ResMed will repair or replace, at its option, the defective product or any of its components. ResMed shall not be responsible for any incidental or consequential damages claimed to have resulted from the sale, installation or use of any ResMed product. Some regions or states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. For patent information, see AirCurve, Air10, ClimateLine, HumidAir and SlimLine are trademarks of ResMed Ltd. SlimLine and ClimateLine are registered in U. filexlib.
.
Resmed aircurve 10 asv owner manual
Resmed aircurve 10 asv guide
Resmed aircurve 10 asv manuaalinen
Resmed aircurve 10 asv handbog
Resmed aircurve 10 asv prirucka

[投稿者]

投稿