Hpm motion sensor instructions

[Elisa]

.
.
Download / Read Online Hpm motion sensor instructions
.
.
.
How do I reset my HPM motion sensor? During MANUAL MODE, by switching the ON/OFF main switch off & on twice in about 3 seconds, the PIR detector will automatically change into AUTO MODE. 4. During AUTO MODE or MANUAL MODE, by switching off the ON/OFF main switch over 10 seconds and then on again , the PIR detector will reset to WARM-UP period.
fileslib. Instruction Manual. 2 Introduction. The Light Patrol Security Sensor incorporates a passive infrared detector that reacts instantly to body.
630/3, 630/3A and 630/3ABL Instruction Manual Introduction The Light Patrol Security Sensor incorporates a passive infrared detector that reacts instantly to
HPM Instruction Manual. HPM Cat 630/5. Movement Detector. 360° FIELD OF VIEW. Technical Specifications: Input Voltage: 230-240V 50Hz.
How do you reprogram a motion sensor? Turn your light switch on and off quickly, hitting each position four times. When the light comes on, turn the switch to the off position and wait five to seven seconds before turning it on again . The light should remain off and the motion detection unit should be reset.

[投稿者]

投稿